How do you install the Blue Wave NA4212 Poolwatch Pool Alarm?

6.79

Overall Score: 6.79/10

Consumer:6.79/10

📖 Read TLDR Review to learn more →

Watch This Product

Watch products with ShopSavvy for price drops, stock alerts, deals and more.

Ask Agent About This Product

Setting up the Blue Wave NA4212 Poolwatch Pool Alarm isn't too complicated, but make sure to follow a few tips so it works well without giving you false alarms. You can use it for both above-ground and in-ground pools, which is pretty handy, just as the manufacturer's description says.

First off, the instruction manual included with the alarm is your go-to guide. It lays out everything step-by-step. Just a heads up—if you've got concrete around your pool, you might need to drill a bit, according to our research. A few folks mentioned this could be a downside if you don't want to make permanent changes.

The alarm is designed to alert you to objects weighing 18 pounds or more entering the pool. Its purpose is to help prevent accidents by notifying you of any unexpected pool activity.

Our research highlights the importance of placing the poolside unit in the right spot to cut down on false alarms. Some reports have mentioned delayed alerts or missed detections, especially with lighter people. One thing to note: you can't adjust the sensitivity settings, so sometimes wind or a busy filtration system might set off the alarm.

For power, the main alarm unit takes six D-cell batteries which aren't included, or you can use a 110V AC adapter with a 9V battery backup for the remote part. The manufacturer also suggests keeping the pool water level just right to avoid false alarms.

Remember, getting the best out of the Blue Wave alarm comes down to carefully following the installation instructions and regular check-ups.

If you take the time to set it up properly, it usually does a good job of alerting you, adding an extra layer of safety to your pool area.