Latest Answers for the Product
Installing a Zinc Protect Roof Strip is a practical way to help keep moss and mildew off your roof. Zinc has unique properties that help with this, and here’s how you can get one installed.
Why Use a Zinc Protect Roof Strip?
When rainwater passes over the Zinc Protect Roof Strip, it releases zinc carbonate, which spreads across the roof to prevent moss, mildew, and fungi from growing.
The manufacturer claims it's made from 99.9% pure zinc and can last over 20 years, so it could be a good long-term way to keep your roof in great shape.
Steps for Installation:
-
Preparation: Before you start, make sure the roof is clean by removing any moss or debris. Based on our research, it's best to pick a dry day for installation.
-
Measuring and Cutting: Measure your roof to figure out how much strip you need. According to the manufacturer, you should place it a few feet from the roof's peak, especially above areas that tend to stay damp and shaded. Then, cut the strip to the length you need.
-
Installation: You’ll want to attach the Zinc Protect strip just below the roof ridge. Use galvanized roofing nails or the adhesive recommended by the manufacturer. Our research suggests spacing the nails about six inches apart to keep the strip secure.
-
Checking Coverage: Keep in mind that the coverage might just extend a few feet from the strip, so you might need multiple strips if your roof is large or oddly shaped.
Tips and Considerations
-
Environmental Awareness: Our research shows this strip works well in shaded, damp places, like the Pacific Northwest. If your climate is different, results might vary.
-
User Experiences: According to our research, many folks have found the strip effective at cutting down moss, but results can depend on factors like the roof’s angle and water flow.
-
Maintenance: It’s smart to do routine checks to see if it’s preventing growth as expected or if any tweaks are needed.
For those looking to cut down on moss without constant cleaning, the Zinc Protect Roof Strip could be a strong choice, especially in climates where it works best.
Following these steps should get you on your way to a cleaner, moss-free roof!
Wondering how long a Zinc Protect strip will last on your roof? It's designed to fight off discoloration and decay from moss, algae, fungus, and mold, and the manufacturer claims it can protect your roof for over 20 years thanks to its 99.9% pure zinc makeup.
The way it works is pretty simple. When rainwater flows over the zinc strip, it creates zinc carbonate, which helps keep those pesky organisms from taking over your roof.
Now, our research shows a mix of results. Some folks see great success, especially in shadowy spots where moss loves to grow. We came across one person who had good results in the Pacific Northwest—which is notorious for its dampness.
On the flip side, there are reports where people didn’t notice much difference even after six months, like with a shed installation. It seems that the outcome can depend a lot on factors like how the roof is set up, the climate, or how well the strip was installed.
Speaking of setup, a lot of people say putting these strips on is pretty straightforward. You just nail them in place, but do make sure you're getting the right length to cover the needed space—any mismatch could affect how well they work.
Lastly, there are a few mentions of rust, which is odd since zinc is supposed to resist corrosion. So keep an eye on how environmental conditions might impact it, especially if your roof is shaded and more prone to moss.
It might not hurt to look into other anti-moss ideas as a backup.
In the end, while the Zinc Protect strip has the potential for long-lasting protection and is fairly easy to install, your mileage might vary based on the specific situation with your roof and how you install it.
If you're tackling moss and mildew on your roof, the Zinc Protect strip could be a pretty handy option. Here's the lowdown on how well it works:
The whole idea of Zinc Protect strips is pretty clever. The manufacturer says they're made from 99.9% pure zinc. When it rains, the water reacts with the zinc and releases zinc carbonate. This creates a barrier that helps keep moss, mildew, algae, fungus, and mold at bay.
Plus, according to the manufacturer, this protection can last over 20 years, with the strip holding up without corroding.
As for the installation, folks generally find it pretty straightforward. Apparently, you just nail the strip in place, making it work on different types of roofs. Someone mentioned that putting the strip along the roof’s drip line really helped tackle a stubborn moss issue, especially in shadier spots where moss is usually more of a problem.
But, like anything, experiences can vary. While plenty of people are happy with the results, some pointed out it didn't work as well for them. For example, after six months, one person didn't notice much change on their shed. Another said it only worked within about five feet below the strip on their roof.
These differences could come down to things like roof conditions, how much shade there is, and the angles of the roof slopes.
In the end, Zinc Protect strips might be worth looking into if you're serious about roof maintenance and keeping moss away. Despite some mixed results, the ease of use and durability seem to make it a solid choice.
Just be sure to think about your roof's particular needs and the installation process to get the best results.
Download ShopSavvy AppCompare prices for anything in real-time, set price alerts, watch for deals by keyword, and much more
Install ShopSavvy Browser ExtensionCompare and track prices automatically while you shop online at thousands of websites.
Footer 1
Published
Subscribe for Updates
Get the latest news, and updates on ShopSavvy. You'll be glad you did!