
The Ring Video Doorbell motion detection range extends approximately 15-30 feet from the device, though optimal performance occurs within 15-20 feet where the passive infrared (PIR) sensor works most effectively.
Ring uses passive infrared sensors that detect heat signatures and temperature changes. This technology means:
Close Range (5-15 feet): Excellent detection of people, pets, and vehicles with high reliability.
Medium Range (15-25 feet): Good detection of larger heat sources like people and vehicles, but may miss smaller objects or slow movement.
Maximum Range (25-30 feet): Inconsistent detection, primarily limited to large, warm objects like vehicles.
Motion Zones Are Essential: You can create up to three custom zones within the detection range to:
Note: Motion zones require "Advanced Motion Detection" enabled on battery models.
Temperature Impact:
Optimal Conditions: Moderate temperatures with clear temperature differential between moving objects and ambient environment.
Horizontal Coverage: Approximately 160 degrees Vertical Coverage: Approximately 90 degrees
This wide angle captures most standard porch areas but may include unwanted zones that require motion zone configuration.
For larger properties requiring extended coverage, consider:
Understanding your Ring Doorbell's detection range helps set realistic expectations and optimize configuration for your specific property layout.
Here's our "TLDR" Review
 Download ShopSavvy App
Download ShopSavvy AppCompare prices for anything in real-time, set price alerts, watch for deals by keyword, and much more
 Install ShopSavvy Browser Extension
Install ShopSavvy Browser ExtensionCompare and track prices automatically while you shop online at thousands of websites.
If you're still curious about the Ring Video Doorbell (2020) - Satin Nickel, here are some other answers you might find interesting:
Ring offers several doorbell models with varying features, power options, and price points. Understanding the differences helps you choose the right model for your specific needs and budget.
Core Features: 1080p HD video, basic motion detection, battery power, wireless installation Best For: Users wanting reliable basic functionality without wiring requirements Battery Life: 6-12 months typical usage Installation: Wireless mounting, 5-10 minute setup
Most Affordable Option: Requires existing doorbell wiring but offers the lowest entry price Limitations: Lower video quality features compared to battery models, requires compatible existing wiring Best For: Users with reliable existing wiring who want basic smart doorbell functionality Power: Hardwired only (16-24V transformer required)
Enhanced Features:
Requirements: Typically require wired installation for consistent power and advanced features Best For: Users wanting premium features and willing to invest in wired installation
Premium Wireless: Enhanced video quality (1536p Head-to-Toe HD+) with wireless convenience Advanced Features: Improved motion detection, better audio quality, enhanced smart integration Best For: Users wanting premium features without wiring requirements or complications
Video Resolution:
Power Source:
Motion Detection:
Audio Quality: Higher-end models typically offer improved two-way audio with noise cancellation
All Ring models offer:
Higher-end models may include additional smart features and more responsive connectivity.
Consider Battery Models When:
Consider Wired Models When:
Budget Considerations:
Consider that all models work with Ring's expanding ecosystem of security products, so your choice primarily affects individual device capabilities rather than overall system compatibility.
Compare current Ring doorbell prices to find the best deals on your preferred model.
Installing a Ring Video Doorbell on brick and stucco surfaces requires different techniques and hardware than standard wood installations, but it's definitely achievable with the right approach.
Hardware Requirements: Brick installations typically need masonry anchors and specialized drill bits beyond what Ring includes in the standard package.
Drilling Technique: Use a hammer drill with carbide-tipped masonry bits sized for your chosen anchors. Drill slowly to avoid cracking mortar or bricks.
Target Mortar Joints: When possible, aim for mortar joints rather than brick faces - they're easier to drill and simpler to repair if you move the doorbell later.
Template Usage: The Ring drilling template helps ensure proper hole spacing, but mark carefully since masonry mistakes are difficult and expensive to correct.
Synthetic Stucco (EIFS): Newer synthetic stucco over foam backing requires long anchors to reach structural material behind the foam layer.
Traditional Stucco: Traditional stucco over wire mesh typically accepts standard masonry anchors well and is more forgiving for installation.
Surface Testing: Test a small, inconspicuous area first to understand your stucco type and determine the best anchor approach.
Hammer Drill: Makes masonry installation significantly easier and reduces risk of surface damage. Quality hammer drills can be rented if you don't own one.
Carbide Drill Bits: Essential for clean holes in masonry surfaces. Start with smaller pilot holes and gradually increase to final size.
Vacuum: Clean debris from holes immediately to ensure proper anchor fit and holding power.
Brick Clips: Some brick clips hook onto brick edges without drilling, though they may not provide adequate security for doorbell installations requiring permanent mounting.
Mounting Blocks: Install mounting blocks or frames attached to mortar joints for easier Ring installation and future modifications.
Professional Installation: For expensive brick or stone surfaces where drilling mistakes could be costly, professional installation may be worthwhile (typically -200).
Drilling Too Fast: High speed can crack masonry surfaces Wrong Anchor Type: Using standard drywall anchors in masonry results in poor holding power Insufficient Depth: Shallow holes don't provide adequate anchor engagement Ignoring Surface Type: Not identifying whether you have synthetic or traditional stucco
Professional installation makes sense when:
Most homeowners can successfully install Ring Doorbells on masonry surfaces with proper tools and patience, but don't hesitate to seek professional help for challenging or high-value surfaces.
Ring Doorbell security has improved significantly since early privacy concerns, but like any connected device, it's not immune to security risks. Understanding current protections and best practices is essential for safe use.
Encryption Standards: Ring devices use WPA2 encryption for WiFi communication and TLS encryption for data transmission to Ring servers, meeting current industry standards.
Mandatory Two-Factor Authentication: Ring now requires two-factor authentication for all accounts, significantly improving security over earlier implementations.
Regular Security Updates: Ring maintains a generally good track record of prompt firmware updates to address discovered vulnerabilities.
Past Problems: Early Ring systems had weak password requirements, optional two-factor authentication, and concerning data sharing practices with law enforcement.
Current Improvements: Ring has implemented stronger password requirements, mandatory 2FA, and more transparent privacy controls with user opt-out options.
User Error (Most Common):
Network Security: Using unsecured or poorly configured home WiFi networks creates vulnerability beyond Ring's control.
Data Sharing Management: Users can opt out of law enforcement data sharing and control video sharing settings.
Neighbors App: Participation is optional and can be disabled entirely.
Data Retention: Manage how long recordings are stored and when they're automatically deleted.
Device Theft: Ring doorbells can be stolen if not properly secured with included security screws and anti-theft mounting features.
Theft Protection: Stolen devices become useless as they're tied to your account and cannot be easily reset by unauthorized users.
Tamper Alerts: Ring devices can notify you if someone attempts to remove or tamper with the device.
Strong Account Security:
Network Security:
Keep Updated: Enable automatic firmware updates through the Ring app to ensure you receive security patches promptly.
Regular Reviews: Periodically review your privacy settings, linked accounts, and sharing preferences.
Monitor Activity: Check your Ring account for unusual activity or unauthorized access.
For most homeowners, Ring Doorbells provide reasonable security when properly configured with strong passwords and two-factor authentication enabled. The bigger security risks typically come from user practices rather than device vulnerabilities.
However, if you have extremely high security requirements or handle sensitive information, consider professional-grade security systems with additional layers of protection and local storage options.
Loading trending deals...
Get the latest news, and updates on ShopSavvy. You'll be glad you did!