# What are common problems with the Saros 10R and how do I fix them?

> Expert troubleshooting guide for Roborock Saros 10R

*Published: 2026-03-19 | Updated: 2026-03-19 | Source: https://shopsavvy.com/answers/roborock-saros-10r-common-problems-fixes-troubleshooting*

---

## Product: Roborock Saros 10R Robot Vacuum
**Brand:** roborock

No robot vacuum is perfect. Here's what [Saros 10R](https://www.amazon.com/dp/B0DHCJ571Z?tag=shopsavvy0d-20) owners actually run into and how to fix it.

## The Navigation Thing

This was the biggest complaint early on. Some robots would spin in circles, misread walls, or clean in weird patterns. If yours does this:

1. **Update your firmware** (seriously, this fixes most issues)
2. Clean the sensors with a microfiber cloth
3. Restart the robot
4. If it's still weird, delete your map and let it remap your home

Good news: most of these issues were fixed through firmware updates in the months after launch. Keep your app and robot updated.

## It's Missing Spots

If your floors look unevenly cleaned:
- Set it to do multiple passes on certain rooms
- Check if the main brush is stuck in a raised position
- Look for clogs in the brushes or dustbin
- Bump up the auto-empty frequency

## Getting Stuck Under the Couch

The Saros 10R is super thin, so it goes under stuff other robots can't reach. Problem is, couches often have weird uneven frames underneath, and the robot gets trapped.

The app tracks where your robot gets stuck and suggests blocking those areas. Go to your map and set up no-go zones for the trouble spots.

## Mopping Issues

If the mop is too dry, too wet, or leaving streaks:
- Adjust water flow in the app
- Use Roborock's cleaning solution (other brands can cause residue)
- Try running multiple mop passes
- Clean along the grain of your floors

## Threshold Problems

The robot claims it can climb 40mm obstacles, but that's for stepped thresholds. Single-step thresholds above 36mm might give it trouble. Mark tall door thresholds in the app.

## Weird Error Messages

If you're getting constant errors telling you to reset, that might be a hardware issue. Contact Roborock support if it keeps happening.

---

*Where this comes from: This answer is based on ShopSavvy's product database, real-time pricing from thousands of retailers, and analysis of user reviews to give you a well-rounded picture.*